Flat holding magnet with black plastic coat
| Part No. | Size [mm] | Weight [g] | Holding force² [N] | |
|---|---|---|---|---|
| D | H | |||
| 171860 | 48 | 6,6 | 46 | 300 |
Maximum operating temperature: 60°C (Size: D: 22-43)
80°C (Size: D: 66-88)
² Holding force
The holding forces are ascertained using an even polished plate of ST 37 material with a thickness of 10 mm by the vertical withdrawal of the magnet at room temperature. Small cracks in the magnet material do not affect the holding force. Deviations up to minus 10 % are possible in some instances. The data given relates to minimum values which are normally exceeded.
Material designation
REFeB is the official designation for NdFeB materials according to DIN IEC 60404-8-1, February edition 2003 (replaces DIN 17410).
Description
These are high-force permanent magnetic systems with partially closed plastic shell and exposed magnets.
Please note: The systems' holding force is reduced proportionally to the not magnetic coat thickness of the sheet metals handled.
| Download Catalogue | |
| Holding magnets | PDF (2.4MB) |