RECo-flat holding magnet, galvanized
| Part No. | Size [mm] | Weight [g] | Holding force² [N] | |
|---|---|---|---|---|
| D¹ | H¹ | |||
| 170600 | 6 | 4,5 | 1 | 5 |
| 170601 | 8 | 4,5 | 2 | 11 |
| 170602 | 10 | 4,5 | 3 | 20 |
| 170603 | 13 | 4,5 | 4 | 40 |
| 170604 | 16 | 4,5 | 7 | 60 |
| 170605 | 20 | 6,0 | 14 | 90 |
| 170606 | 25 | 7,0 | 26 | 150 |
| 170607 | 32 | 7,0 | 42 | 220 |
Maximum operating temperature: 200° C
¹ Tolerance
The size tolerance can be seen by hovering the mouse over the values in the table above.
² Holding force
The holding forces are ascertained using an even polished plate of ST 37 material with a thickness of 10 mm by the vertical withdrawal of the magnet at room temperature. Small cracks in the magnet material do not affect the holding force. Deviations up to minus 10 % are possible in some instances. The data given relates to minimum values which are normally exceeded.
| Download Catalogue | |
| Holding magnets | PDF (2.4MB) |
Fairs & Exhibitions
From 26. through 28.06.2012 ThyssenKrupp Magnettechnik and ThyssenKrupp Electrical Steel are represented together at CWIEME in Berlin.Please visit our stand 3323 in exhibition hall 2.2.!
For arrangements please contact us in advance:
magnet@thyssenkrupp.com or Tel: +49 201 946161-551